SIMATIC Automation Tool V3.1
- Ngày đăng: 27-09-2022
[Download] SIMATIC Automation Tool V3.1 (Real 100%)
PLC Software • Siemens Software
[Download] SIMATIC Automation Tool V3.1 (Real 100%)
SIMATIC Automation Tool – Is a Siemens PLC configuration tool without TIA Portal software
When implementing an automation project, customers do not always have a computer installed with TIA Portal for us to interfere with the remote PLC. As we know, the most basic TIA Portal is also quite heavy (around 5GB) and requires a powerful machine configuration. So not all computers can install this software.
This software is very light (about 300MB), this is a tool to help us communicate with the PLC and perform some basic operations. Especially on the client side, they do not need to install TIA Portal software to handle the situation.
- Features that SIMATIC Automation Tool can perform:
+ Scan the PROFINET / Ethernet network and identify the connected devices in the network.
+ Flash the device’s LED or HMI screen to locate the device.
+ Create a table that maps the accessible devices on the network
+ Addressing (IP, subnet, gateway) and station name (PROFINET device)
+ Real time synchronization on PLC with time on your PC.
+ Download the program to the PLC (V3.1 or higher versions with failsafe support) and HMI.
+ Switch the RUN / STOP mode on the PLC.
+ PLC memory reset.
+ Backup / Restore PLC or HMI as backup file (V3.1 or newer supports failsafe)
+ Upload service data from PLC (data is recorded when PLC is faulty)
+ Read diagnostics from the PLC.
+ Firmware upgrade in PLC and attached modules.
+ Upload, download, or delete Recipe data (stored on a memory card) from the PLC
+ Upload or delete Data log (stored on memory card) from PLC
+ Store and save network information (network) as:
Text file .csv or .Sat file with password protected and encrypted
+ API support for creating .NET applications based on the features available in SIMATIC Automation Tool
>>> Link Download Software ( Google Driver – Fast For Download )
Thanks for reading !
Bài viết khác
-
Step 7 MicroWIN on Windows 10 (V4.0 SP9)
- Ngày đăng: 27-09-2022
- Lượt xem: 2448
Default, Siemens Step7 MicroWIN V4.0 does not support Windows 10. You can install it on Windows 10, but you can not upload and download the program to PC and PLC, because the driver of USB-PPI is not found. This post will guide you to install Step7 MicroWIN on Windows 10 (V4.0 SP9)
-
SINAMICS STARTER V4.5 SP1
- Ngày đăng: 27-09-2022
- Lượt xem: 1819
This article smartplc.com.vn would like to share to everyone the download link and instructions for installing the Starter V4.5 SP1 software. This software is used to configure and install SINAMICS inverters such as: G110, G120, …
-
Simatic Automation Tool – The Powerful Tool for Simatic Devices
- Ngày đăng: 27-09-2022
- Lượt xem: 599
The SIMATIC Automation Tool (SAT) is valuable in machine and plant operation. Using this tool, you can perform an operation on multiple network devices at a time. Download the latest version( V3.1 SP3) at smartplc.com.vn
-
Sim_EKB_Install_2020_02_29 – Siemens Software
- Ngày đăng: 27-09-2022
- Lượt xem: 623
Sim_EKB_Install software is a famous and popular software for many people, me too! Have you been here and read this article, everyone knows what our purpose is ^^. It is really useful for everyone who wants to get acquainted and work with Siemens software without economic conditions, especially students or engineers in underdeveloped countries.
-
SIM EKB Install 2021-4-20 for Siemens Software
- Ngày đăng: 27-09-2022
- Lượt xem: 1154
SIM_EKB is one of the extremely famous software for automation engineers as well as students, it is popular all over the world.