PLC S7-300 | TÔNG QUAN SIMATIC S7-300 SIEMENS

CPU 312

6ES7312-1AE14-0AB0

Work memory 32 KB, supply voltage 24 V DC, MPI; MMC required

CPU 314

6ES7314-1AG14-0AB0

Work memory 128 KB, supply voltage 24 V DC, MPI; MMC required

CPU 315-2 DP

6ES7315-2AH14-0AB0

Work memory 256 KB, supply voltage 24 V DC, MPI, PROFIBUS DP master/slave interface; MMC required

CPU 315-2 PN/DP

6ES7315-2EH14-0AB0

Work memory 384 KB, 24 V DC power supply, combined MPI/PROFIBUS DP master/slave interface, Ethernet/PROFINET interface with 2-port switch; MMC required

CPU 317-2 DP

6ES7317-2AK14-0AB0

Work memory 1 MB, supply voltage 24 V DC, MPI, PROFIBUS DP master/slave interface; MMC required

CPU 317-2 PN/DP

6ES7317-2EK14-0AB0

Work memory 1 MB, 24 V DC power supply, combined MPI/PROFIBUS DP master/slave interface, Ethernet/PROFINET interface with 2-port switch; MMC required

CPU 319-3 PN/DP

6ES7318-3EL01-0AB0

Work memory 2 MB, power supply 24 V DC, combined MPI/PROFIBUS DP master/slave interface, PROFIBUS DP master/ slave interface, Ethernet/PROFINET interface with 2-port switch; MMC required

SIPLUS S7-300 CPU 314

6AG1314-1AG14-7AB0

-25…+70 °C with conformal coating based on 6ES7314-1AG14-0AB0 . Central processing unit with MPI, Integr. power supply 24 V DC, work memory 128 KB, Micro Memory Card required

6AG1314-1AG14-2AY0

-25…+60 °C with conformal coating acc. to EN 50155 based on 6ES7314-1AG14-0AB0 . central processing unit with MPI, integr. power supply 24 V DC, work memory 128 KB, Micro Memory Card required

SIPLUS S7-300 CPU 315-2 DP

6AG1315-2AH14-7AB0

-25…+70°C with conformal coating based on 6ES7315-2AH14-0AB0 . Central processing unit with MPI Integr. power supply 24 V DC Work memory 256 KB 2nd interface DP master/ slave Micro Memory Card required

6AG1315-2AH14-2AY0

-25…+60 °C with conformal coating according to EN 50155 T1 Cat 1 Cl A/ B: based on 6ES7315-2AH14-0AB0 . central processing unit with MPI integr. power supply 24 V DC work memory 256 KB 2nd interface DP master/ slave Micro Memory Card required

SIPLUS S7-300 CPU 315-2 PN/DP

6AG1315-2EH14-7AB0

-25 … +70°C with conformal coating based on 6ES7315-2EH14-0AB0 . CENTRAL PROCESSING UNIT WITH 384 KBYTE WORKING MEMORY, 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE ETHERNET PROFINET, WITH 2 PORT SWITCH, MICRO MEMORY CARD NECESSARY

6AG1315-2EH14-2AY0

-25…+60 °C with conformity with EN 50155 T1 Cat 1 Cl A/B based on 6ES7315-2EH14-0AB0 . central processing unit with 384 KB work memory, 1st interface MPI/DP 12Mbit/ s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required

SIPLUS S7-300 CPU 317-2 PN/DP

6AG1317-2EK14-7AB0

-25…+70°C with conformal coating based on 6ES7317-2Ek14-0AB0 . Central processing unit with 1 MB work memory, 1st interface MPI/DP 12Mbit/ s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required

6AG1317-2EK14-2AY0

-25…+60 °C conformity with EN 50155 T1 Cat 1 Cl A/B with conformal coating based on 6ES7317-2Ek14-0AB0 . central processing unit with 1 MB work memory, 1st interface MPI/DP 12Mbit/ s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required

CPU 312C

6ES7312-5BF04-0AB0

Compact CPU, work memory 64 KB, supply voltage 24 V DC, 10 DI/6 DQ integrated, integrated functions, MPI; including slot number labels; MMC required

CPU 313C

6ES7313-5BG04-0AB0

Compact CPU, work memory 128 KB, supply voltage 24 V DC, 24 DI/16 DQ, 4 AI/2 AQ integrated, integrated functions, MPI; MMC required

CPU 313C-2 PtP

6ES7313-6BG04-0AB0

Compact CPU, work memory 128 KB, supply voltage 24 V DC, 16 DI/16 DQ integrated, integrated functions, MPI, RS 422/485 interface; MMC required

CPU 313C-2 DP

6ES7313-6CG04-0AB0

Compact CPU, work memory 128 KB, 24 V DC power supply, 16 DI/16 DQ integrated, integrated functions, MPI, PROFIBUS DP master/slave interface; MMC required

CPU 314C-2 PtP

6ES7314-6BH04-0AB0

Compact CPU, work memory 192 KB, supply voltage 24 V DC, 24 DI/16 DQ/4 AI/2 AQ integrated, integrated functions, MPI, RS 422/ 485 interface; MMC required

CPU 314C-2 DP

6ES7314-6CH04-0AB0

Compact CPU, work memory 192 KB, supply voltage 24 V DC, 24 DI/16 DQ/4 AI/2 AQ integrated, integrated functions, MPI, PROFIBUS DP master/slave interface; MMC required

CPU 314C-2 PN/DP

6ES7314-6EH04-0AB0

Compact CPU, work memory 192 KB, supply voltage 24 V DC, 24 DI/16 DO/4 AI/2 AO integrated, integrated functions, MPI; PROFIBUS DP master/slave interface; PROFINET IO controller/ I-device interface, MMC required

SIPLUS S7-300 CPU 312C

6AG1312-5BF04-7AB0

Medial exposure -25…+70°C based on 6ES7312-5BF04-0AB0 . Compact CPU with MPI, 10 DI/6 DQ, 2 high-speed counters (10 kHz) Integr. power supply 24 V DC, work memory 64 KB, Front connector (1x 40-pole) and Micro Memory Card required

6AG1312-5BF04-2AY0

Conformal coating according to EN 50155 T1 Cat 1 Cl A/ B: based on 6ES7312-5BF04-0AB0 . compact CPU with MPI, 10 DI/6 DQ, 2 high-speed counters (10 kHz) integr. power supply 24 V DC, work memory 64 KB, front connector (1x 40-pole) and Micro Memory Card required

SIPLUS S7-300 CPU 313C

6AG1313-5BG04-7AB0

Medial exposure -25…+70°C based on 6ES7313-5BG04-0AB0 . Compact CPU with MPI, 24 DI/16 DO, 4 AI, 2 AO, 1 Pt100, 3 high-speed counters (30 kHz), Integr. power supply 24 V DC, work memory 128 KB, Front connector (2x 40-pole) and Micro Memory Card required

6AG1313-5BG04-2AY0

Conformal coating according to EN 50155 T1 Cat 1 Cl A/ B: based on 6ES7313-5BG04-0AB0 . compact CPU with MPI, 24 DI/16 DO, 4 AI, 2 AO, 1 Pt100, 3 high-speed counters (30 kHz), integr. power supply 24 V DC, work memory 128 KB, front connector (2x 40-pole) and Micro Memory Card required

SIPLUS S7-300 CPU 313C-2 DP

6AG1313-6CG04-7AB0

Medial exposure -25…+70°C based on 6ES7313-6CG04-0AB0 . Compact CPU with MPI, 16 DI/16 DO, 3 high-speed counters (30 kHz), integrated DP interface, Integr. power supply 24 V DC, work memory 128 KB, Front connector (1x 40-pole) and Micro Memory Card required

6AG1313-6CG04-2AY0

Conformal coating according to EN 50155 T1 Cat 1 Cl A/ B: based on 6ES7313-6CG04-0AB0 . compact CPU with MPI, 16 DI/16 DO, 3 high-speed counters (30 kHz), integrated DP interface, integr. power supply 24 V DC, work memory 128 KB, front connector (1x 40-pole) and Micro Memory Card required

SIPLUS S7-300 CPU 314C-2 PtP

6AG1314-6BH04-7AB0

Medial exposure -25…+70°C based on 6ES7314-6BH04-0AB0. Compact CPU with MPI, 24 DI/16 DO, 4 AI, 2 AO, 1 Pt100, 4 high-speed counters (60 kHz), integrated interface RS485, Integr. power supply 24 V DC, work memory 192 KB, Front connector (2x 40-pole) and Micro Memory Card required

SIPLUS S7-300 CPU 314C-2 DP

6AG1314-6CH04-7AB0

Medial exposure -25…+70°C based on 6ES7314-6CH04-0AB0 . Compact CPU with MPI, 24 DI/16 DO, 4 AI, 2 AO, 1 Pt100, 4 high-speed counters (60 kHz), integrated DP interface, Integr. power supply 24 V DC, work memory 192 KB, Front connector (2x 40-pole) and Micro Memory Card required

6AG1314-6CH04-2AY0

Conformal coating according to EN 50155 T1 Cat 1 Cl A/ B: based on 6ES7314-6CH04-0AB0 . compact CPU with MPI, 24 DI/16 DO, 4 AI, 2 AO, 1 Pt100, 4 high-speed counters (60 kHz), integrated DP interface, integr. power supply 24 V DC, work memory 192 KB, front connector (2x 40-pole) and Micro Memory Card required

SIPLUS S7-300 CPU 314C-2 PN/DP

6AG1314-6EH04-7AB0

Conformal coating -25…+70°C based on 6ES7314-6EH04-0AB0 . Compact CPU with 192 KB work memory, 24 DI/16 DO, 4 AI, 2 AO, 1 Pt100, 4 high-speed counters (60 kHz), 1st interface MPI/DP 12Mbit/ s, 2nd interface Ethernet PROFINET, with 2-port switch, Integr. power supply 24 V DC, Front connector (2x 40-pole) and Micro Memory Card required

CPU 315F-2 DP

6ES7315-6FF04-0AB0

CPU for SIMATIC S7-300F; work memory 384 KB, supply voltage 24 V DC, MPI, PROFIBUS DP master/slave interface, incl. slot number labels; MMC required

CPU 315F-2 PN/DP

6ES7315-2FJ14-0AB0

CPU for SIMATIC S7-300F; work memory, 512 KB supply voltage 24 V DC; MPI/PROFIBUS DP master/slave interface; Industrial Ethernet/ PROFINET interface; incl. slot number labels; MMC required

CPU 317F-2 DP

6ES7317-6FF04-0AB0

Work memory 1.5 MB, supply voltage 24 V DC, MPI, PROFIBUS DP master/slave interface, MMC required

CPU 317F-2 PN/DP

6ES7317-2FK14-0AB0

Work memory 1.5 MB, supply voltage 24 V DC, MPI/PROFIBUS DP master/slave interface, Industrial Ethernet/ PROFINET interface; MMC required

CPU 319F-3 PN/DP

6ES7318-3FL01-0AB0

Work memory 2.5 MB, supply voltage 24 V DC, combined MPI/PROFIBUS DP master/slave interface, PROFIBUS DP master/ slave interface, Ethernet/PROFINET interface; MMC required

SIPLUS S7-300 CPU 315F-2 DP

6AG1315-6FF04-2AB0

-25…+60°C with conformal coating based on 6ES7315-6FF04-0AB0 . Fail-safe module with MPI Integr. power supply 24 V DC, Work memory 384 KB, 40 mm width, 2nd interface DP master/ slave Micro Memory Card required

6AG1315-6FF04-2AY0

Conformal coating according to EN 50155 T1 Cat 1 Cl A/ B: based on 6ES7315-6FF04-0ab0 . fail-safe module with MPI integr. power supply 24 V DC, work memory 384 KB, 40 mm width, 2nd interface DP master/ slave Micro Memory Card required

SIPLUS S7-300 CPU 315F-2 PN/DP

6AG1315-2FJ14-2AB0

-25…+60°C with conformal coating based on 6ES7315-2FJ14-0AB0 . Central processing unit with 512 KB work memory, 1st interface MPI/DP 12Mbit/ s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required

6AG1315-2FJ14-2AY0

Conformity with EN 50155 T1 Cat 1 Cl A/B with conformal coating based on 6ES7315-2FJ14-0AB0 . central processing unit with 512 KB work memory, 1st interface MPI/DP 12Mbit/ s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required

SIPLUS S7-300 CPU 317F-2 DP

6AG1317-6FF04-2AB0

-25…+60°C with conformal coating based on 6ES7317-6FF04-0AB0 . Central processing unit with 1.5 MB work memory, 1st interface MPI/DP 12Mbit/ , 2nd interface DP master/ Slave, Micro Memory Card required Can be used with software package S7 Distributed Safety V5.2 SP1 or higher

SIPLUS S7-300 CPU 317F-2 PN/DP

6AG1317-2FK14-2AB0

-25…+60°C with conformal coating based on 6ES7317-2FK14-0AB0 . Central processing unit with 1.5 MB work memory, 1st interface MPI/DP 12Mbit/ s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required

6AG1317-2FK14-2AY0

Conformity with EN 50155 T1 Cat 1 Cl A/B based on 6ES7317-2FK14-0AB0 . central processing unit with 1.5 MB work memory, 1st interface MPI/DP 12Mbit/ s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required

CPU 315T-3 PN/DP

6ES7315-7TJ10-0AB0

Work memory 384 KB, supply voltage 24 V DC, MPI, PROFIBUS DP master/slave interface, PROFIBUS DP(DRIVE) interface, Ethernet/PROFINET interface with 2-port switch;with technology/motion control functions; MMC required

CPU 317T-3 PN/DP

6ES7317-7TK10-0AB0

Work memory 1024 KB, supply voltage 24 V DC, MPI, PROFIBUS DP master/slave interface, PROFIBUS DP (DRIVE) interface, Ethernet/PROFINET interface with 2-port switch with technology/motion control functions; MMC required

CPU 317TF-3 PN/DP

6ES7317-7UL10-0AB0

Work memory 1.5 MB, supply voltage 24 V DC, MPI, PROFIBUS DP master/slave interface, PROFIBUS DP(DRIVE) interface, Ethernet/PROFINET interface with 2-port switch;with technology/motion control functions; MMC required

SIMATIC S7-300 with Regulated power supply PS305 input: 24-110 V DC output: 24 V DC/2 A

6ES7305-1BA80-0AA0

SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24 V DC/2 A

6ES7307-1BA01-0AA0

SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24 V/5 A DC

6ES7307-1EA01-0AA0

SIMATIC S7-300 Outdoor Regulated power supply PS307 input: 120/230 V AC, output: 24 V/5 A DC

6ES7307-1EA80-0AA0

SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24 V / 10 A DC

6ES7307-1KA02-0AA0

SIPLUS S7-300 PS 305 -25…+70°C with conformal coating based on 6ES7305-1BA80-0AA0 . Stabilized power supplies Input: 24-110 V DC Output: 24 V DC/2 A

6AG1305-1BA80-2AA0

SIPLUS S7-300 PS 307 -25 … +70°C with conformal coating based on 6ES7307-1EA01-0AA0 . STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V DC/5 A.

6AG1307-1EA01-7AA0

SIPLUS S7-300 PS 307 10 A -25…+70°C with conformal coating based on 6ES7307-1KA02-0AA0 . Stabilized power supply PS 307 Input: 120/230 V AC Output: 24 V DC/10 A

6AG1307-1KA02-7AA0

Module DI

SIMATIC S7-300, Digital input SM 321, isolated, 16 DI, 24 V DC, 1x 20-pole

6ES7321-1BH02-0AA0

SIMATIC S7-300, Digital input SM 321, isolated, 16 DI, 24 V DC, 1x 20-pole, 0.05 ms input delay

6ES7321-1BH10-0AA0

SIMATIC S7-300, Digital input SM 321, Isolated 16 DI, 24 V DC, Source input, 1x 20-pole

6ES7321-1BH50-0AA0

SIMATIC S7-300, Digital input SM 321, Isolated 32 DI, 24 V DC, 1x 40-pole

6ES7321-1BL00-0AA0

SIMATIC S7-300 digital input SM 321, Isolated in groups of 16, 64 DI, 24 V DC, 3ms, Sink/source input Terminal blocks 6ES7392-1.N00-0AA0 and cable 6ES7392-4…0-0AA0 required

6ES7321-1BP00-0AA0

SIMATIC S7-300, Digital input SM 321, isolated, 16 DI, 24-48 V AC/DC with single rooting, 1x 40-pole

6ES7321-1CH00-0AA0

SIMATIC S7-300, Digital input SM 321, isolated, 16 DI, 48-125 V DC, 1x 20-pole

6ES7321-1CH20-0AA0

SIMATIC S7-300, Digital input SM 321, isolated, 32 DI, 120 V AC, 1x 40-pole

6ES7321-1EL00-0AA0

SIMATIC S7-300, Digital input SM 321, isolated, 8 DI, 120 V/230 V AC, 1x 20-pole

6ES7321-1FF01-0AA0

SIMATIC S7-300, Digital input SM 321, isolated, 8 DI, 120 V/230 V AC, 1x 40-pole, with single rooting/channel

6ES7321-1FF10-0AA0

SIMATIC S7-300, Digital input SM 321, Isolated 16 DI, 120/230 V AC, 1x 20-pole

6ES7321-1FH00-0AA0

SIMATIC S7-300, Digital input SM 321, isolated, 16 DI; 24 V DC, 1x 20-pole, process interrupt, diagnostics, suitable for isochronous mode

6ES7321-7BH01-0AB0

Module DO

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 24 V DC, 2A, 1x 20-pole

6ES7322-1BF01-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 16 DO, 24 V DC, 0.5A, 1x 20-pole, Total current 4 A/group (8 A/module)

6ES7322-1BH01-0AA0

SIMATIC S7-300, Digital output SM 322 High Speed, isolated, 16 DO, 24 V DC, 0.5A, 1x 20-pole

6ES7322-1BH10-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 32 DO, 24 V DC, 0.5A, 1x 40-pole, Total current 4 A/group (16 A/module)

6ES7322-1BL00-0AA0

SIMATIC S7-300 digital output SM 322, Isolated in groups of 16, 64DO, 24 V DC, 0.3A sink output Total current 2 A/group, 8 A/module Terminal blocks 6ES7392-1.N00-0AA0 and cable 6ES7392-4…0-0AA0 required

6ES7322-1BP00-0AA0

SIMATIC S7-300 digital output SM 322, Isolated in groups of 16, 64DO, 24 V DC, 0.3A sinking output Total current 2 A/group, 8 A/module Terminal blocks 6ES7392-1.N00-0AA0 and cable 6ES7392-4…0-0AA0 required

6ES7322-1BP50-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 48-125 V DC, 1.5A, 1x 20-pole

6ES7322-1CF00-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 120/230 V AC, 1 A, 1x 20-pole

6ES7322-1FF01-0AA0

SIMATIC S7-300, Digital output SM 322, Isolated 16 DO, 120/230 V AC, 1 A, 1x 20-pole

6ES7322-1FH00-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 32 DO, 120 V/230 V AC, 1 A, double-width, 2x 20-pole

6ES7322-1FL00-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO (relay), 1x 20-pole, 24 V DC, 2 A or 230 V AC, 2A

6ES7322-1HF01-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO (relay), 1x 40-pole, 24 V DC, 5 A or 230 V AC, 5 A, connectors with spring-loaded terminal can be used as of 6ES7392-1BM01-0AA0

6ES7322-1HF10-0AA0

SIMATIC S7-300, Digital output SM 322, Isolated 16 DO, relay contacts, 1x 20-pole

6ES7322-1HH01-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 120/230 V AC, 2A, with single rooting/channel and selectable failure mode, 1x 40-pole

6ES7322-5FF00-0AB0

SIMATIC S7-300, Digital output SM 322, isolated, 16 DO (solid-state relay), 24-48 V AC/DC; 0.5 A with single rooting, 1x 40-pole

6ES7322-5GH00-0AB0

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO (relay), 1x 40-pole, 24 V DC, 120-230 V AC, 5 A with RC filter overvoltage protection

6ES7322-5HF00-0AB0

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 24 V DC, 0.5A (1x 8 DO), Short-circuit protection diagnostics, 1x 20-pole

6ES7322-8BF00-0AB0

Module DI/DO

SIMATIC S7-300, Digital module SM 323, isolated, 8DI and 8DO, 24 V DC, 0.5 A Total current 2A, 1x 20-pole

6ES7323-1BH01-0AA0

SIMATIC S7-300, Digital module SM 323, isolated, 16 DI and 16 DO, 24 V DC, 0.5 A, Total current 4A, 1x 40-pole

6ES7323-1BL00-0AA0

SIMATIC S7-300, Digital module SM 327, isolated, 8DI and 8DX, 24 V DC, 0.5 A 1x 20-pole; 8DX by individual channels Can be parameterized as DI or DO

6ES7327-1BH00-0AB0

Module DI

SIPLUS S7-300 SM 321-20-pole -40…+70 °C With conformal coating based on 6ES7321-1BH02-0AA0 . Digital input Isolated 16 DI, 24 V DC, 1x 20-pole

6AG1321-1BH02-2AA0

SIPLUS S7-300 SM 321-40-pole -40…+70 °C With conformal coating based on 6ES7321-1BL00-0AA0 . Digital input Isolated 32 DI, 24 V DC, 1x 40-pole

6AG1321-1BL00-2AA0

SIPLUS S7-300 SM 321 -25…+70 °C With conformal coating based on 6ES7321-1CH20-0AA0 . Digital input Isolated 16 DI, 48-125 V DC, 1x 20-pole

6AG1321-1CH20-2AA0

SIPLUS S7-300 SM 321-20-pole -40…+70 °C With conformal coating based on 6ES7321-1FF01-0AA0 . Digital input Isolated 8 DI, 120 V/230 V AC

6AG1321-1FF01-2AA0

SIPLUS S7-300 SM321 8DI/120/230 -25…+70°C with conformal coating based on 6ES7321-1FF10-0AA0 . Digital input isolated, 8 DI, 120 V/230 V AC, 1x 40-pole, with single rooting/channel

6AG1321-1FF10-7AA0

SIPLUS S7-300 SM321 16DE/120/23 -40…+70°C with conformal coating based on 6ES7321-1FH00-0AA0 . Digital input isolated 16 DI, 120/230 V AC, 1x 20-pole

6AG1321-1FH00-7AA0

SIPLUS S7-300 SM 321-20-pole -25…+70 °C With conformal coating based on 6ES7321-7BH01-0AB0 . Digital input Isolated “16 DI; 24 V DC, 1x 20-pole” Process interrupt, diagnostics, suitable for isochr. mode

6AG1321-7BH01-2AB0

SIPLUS PCS 7 SM 321 16DI for medial exposure with conformal coating based on 6ES7321-7TH00-0AB0 . Digital input 16 DI; 24 V DC, 1x 40-pole, diagnostics-capable, for contacts (wired/ not wired), NAMUR encoder, 3/4-wire BERO, with chatter monitoring; Pulse extension, Open-circuit detection Connection IM 153-2 required

6AG1321-7TH00-4AB0

Module DO

SIPLUS S7-300 SM 322 (-1BF01) -25…+70°C with conformal coating based on 6ES7322-1BF01-0AA0. Digital output SM 322, isolated, 8 DO, 24 V DC, 2A, 1x 20-pole

6AG1322-1BF01-2XB0

SIPLUS S7-300 SM 322-20-pole -25…+70 °C With conformal coating based on 6ES7322-1BH01-0AA0 . Digital output Isolated 16 DQ, 24 V DC, 0.5 A, total current 4 A/group (8 A/module)

6AG1322-1BH01-2AA0

SIPLUS S7-300 SM 322 32 DQ 40-pole -25…+70 °C With conformal coating based on 6ES7322-1BL00-0AA0 . Digital output Isolated, 32 DQ, 24 V DC, 0.5 A, 1x 40-pole, total current 4 A/group (16 A/module)

6AG1322-1BL00-2AA0

SIPLUS S7-300 SM 322 8DO 48-125V -25…+70°C with conformal coating based on 6ES7322-1CF00-0AA0 . Digital output isolated, 8 DO, 48-125 V DC, 1.5A, 1x 20-pole

6AG1322-1CF00-7AA0

SIPLUS S7-300 SM 322 8DO 120/ 220 -40…+70°C with conformal coating based on 6ES7322-1FF01-0AA0 . Digital output isolated, 8 DO, 120/230 V AC, 1 A, 1x 20-pole

6AG1322-1FF01-7AA0

SIPLUS S7-300 SM 322 16DO -40…+70°C with conformal coating based on 6ES7322-1FH00-0AA0 . Digital output Isolated 16 DO, 120/230 V AC, 1 A, 1x 20-pole

6AG1322-1FH00-7AA0

SIPLUS S7-300 SM 322-40-pole -25…+60 °C With conformal coating based on 6ES7322-1HF10-0AA0 . Digital output Isolated 8 DQ (relay), 1x 40-pole, 24 V DC, 5 A or 230 V AC, 5 A, connectors with spring-loaded terminal can be used as of 6ES7392-1BM01-0AA0

6AG1322-1HF10-2AA0

SIPLUS S7-300 SM 322-20-pole -40…+70 °C With conformal coating based on 6ES7322-1HH01-0AA0 . Digital output optically isolated 16 DQ, relay contacts

6AG1322-1HH01-2AA0

SIPLUS S7-300 SM 322 8DO with conformal coating based on 6ES7322-5FF00-0AB0 . Digital output isolated, 8 DO, 120/230 V AC, 2A, with single rooting/channel and selectable failure mode, 1x 40-pole

6AG1322-5FF00-4AB0

SIPLUS S7-300 SM 322 8RO 40pol with conformal coating based on 6ES7322-5HF00-0AB0 . Digital output isolated, 8 DO (relay), 1x 40-pole, 24 V DC, 120-230 V AC, 5 A with RC filter overvoltage protection

6AG1322-5HF00-4AB0

SIPLUS S7-300 SM 322-20-pole -25…+60 °C based on 6ES7322-8BF00-0AB0

6AG1322-8BF00-2AB0

Module DI/DO

SIPLUS S7-300 SM 323-20-pole -40…+70 °C With conformal coating based on 6ES7323-1BH01-0AA0 . Digital module Isolated 8 DI and 8 DQ, 24 V DC, 0.5 A Total current 2 A

6AG1323-1BH01-2AA0

Module AI

SIMATIC S7-300, Analog input SM 331, Isolated 8 AI, resolution 13 bits U/I/resistor/Pt100, NI100, NI1000, LG-NI1000, PTC/KTY, 66 ms conversion time; 1x 40-pole

6ES7331-1KF02-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI, resolution 14 bit, 0.052 ms/channel current, Voltage alarm, diagnostics, 1x 20-pole, suitable for isochronous mode Improved bus cycle time for isochronous mode

6ES7331-7HF01-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 2 AI, Resolution 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole, Removing/inserting with active backplane bus

6ES7331-7KB02-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI, Resolution 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole Removing/inserting with active backplane bus

6ES7331-7KF02-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI; +/-5/10V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit (55ms), Single rooting (50 V COM.), 1x 40-pole

6ES7331-7NF00-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI; +/-5/10V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit, Single rooting (60 V COM.), 4-channel operation: 10 ms, 8-channel operation: 23-95ms, 1x 40-pole

6ES7331-7NF10-0AB0

SIMATIC S7-300, Analog input SM 331, single channel Isolated 250 V AC, 6 AI thermocouples Type B, E, J, K, L, N, R, S, T Voltage: +/-25MV to +/-1V 16 bit, 50ms, 1x 40-pole

6ES7331-7PE10-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 2/3/4-wire, 8 AI, Resistor, Pt100/200/1000 NI100/120/200/500/1000, CU10, characteristics according to GOST 16 (internal 24) bit, 50ms, 1x 40-pole

6ES7331-7PF01-0AB0

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI thermocouples Type B, E, J, K, L, N, R, S, T TXK/TXK (L) according to GOST 16 bit, 50ms, 1x 40-pole

6ES7331-7PF11-0AB0

Module AO

SIMATIC S7-300, Analog output SM 332, isolated, 2 AO, U/I; resolution 11/12 bits, 20-pole, Removing/inserting with active backplane bus possible

6ES7332-5HB01-0AB0

SIMATIC S7-300, Analog output SM 332, isolated, 4 AO, U/I; diagnostics; resolution 11/12 bits, 20-pole, removing and inserting possible with active backplane bus

6ES7332-5HD01-0AB0

SIMATIC S7-300, Analog output SM 332, isolated, 8 AO, U/I; diagnostics; resolution 11/12 bits, 40-pole, removing and inserting possible with active backplane bus

6ES7332-5HF00-0AB0

SIMATIC S7-300, Analog output SM 332, isolated by channel, 4 AI, Resolution 16 bit, 0-10 V, 1-5 V, +/-10 V, +/-20 mA, 0/4-20mA, 20-pole, suitable for isochronous mode improved bus cycle times for the isochronous mode

6ES7332-7ND02-0AB0

Module AI/AO

SIMATIC S7-300, Analog module SM 334, Non-isolated 4 AI/2 AO, 1x 20-pole, Removing and inserting possible with active backplane bus

6ES7334-0CE01-0AA0

SIMATIC S7-300, Analog module SM 334, isolated, 4 AI/2 AO, 12 bit, 0-10 V f. Pt100 (climatic range -120-155 degrees) and 10 kOhm measuring range, 1x 20-pole

6ES7334-0KE00-0AB0

Module AI

SIPLUS S7-300 SM331 8AE -25 … +70°C with conformal coating based on 6ES7331-1KF02-0AB0 . OPTICALLY ISOLATED, 8 AI, 13 BIT RESOLUTION, U/I/RESISTANCE/PT100, NI100, NI1000, LG-NI1000, PTC / KTY, 66 MS MODULE UPDATE, 1 X 40 PIN

6AG1331-1KF02-7AB0

SIPLUS S7-300 SM 331-20-pole -25…+70°C with conformal coating based on 6ES7331-7KB02-0AB0 . Analog input isolated 2 AI, Resolution 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole, Removing/inserting with active backplane bus

6AG1331-7KB02-2AB0

SIPLUS S7-300 SM 331 20-pole -25…+70 °C With conformal coating Based on 6ES7331-7KF02-0AB0 . Analog input isolated 8 AI, resol. 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole Removing/inserting with active backplane bus

6AG1331-7KF02-2AB0

SIPLUS S7-300 SM 331 40-pole -25…+70 °C With conformal coating based on 6ES7331-7NF00-0AB0 . Analog input isolated 8 AI; +/-5/10 V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit (55 ms), single rooting (50 V com.)

6AG1331-7NF00-2AB0

SIPLUS S7-300 SM 331 8AI 40-pole -25…+60°C with conformal coating based on 6ES7331-7NF10-0AB0 . Analog input isolated, 8 AI; +/-5/10 V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit, Single rooting (60 V COM.), 4-channel operation: 10 ms, 8-channel operation: 23-95ms, 1x 40-pole

6AG1331-7NF10-2AB0

SIPLUS S7-300 SM 331 8AI with conformal coating based on 6ES7331-7PF01-0AB0 . Analog input isolated, 2/3/4-wire, 8 AI, Resistor, Pt100/200/1000 NI100/120/200/500/1000, CU10, characteristics according to GOST 16 (internal 24) bit, 50ms, 1x 40-pole

6AG1331-7PF01-4AB0

SIPLUS S7-300 SM 331 8AI 40-pole with conformal coating based on 6ES7331-7PF11-0AB0. Analog input isolated, 8 AI thermocouples Type B, E, J, K, L, N, R, S, T TXK/TXK (L) according to GOST 16 bit, 50ms, 1x 40-pole

6AG1331-7PF11-4AB0

Module AO

SIPLUS S7-300 SM 332-20-pole -25…+70 °C With conformal coating based on 6ES7332-5HB01-0AB0 . Analog output Isolated, 2 AQ, U/I; Resolution 11/12 bit 20-pole, removing/inserting with active backplane bus possible

6AG1332-5HB01-2AB0

SIPLUS S7-300 SM 332 4AO U/I -25…+70°C with conformal coating based on 6ES7332-5HD01-0AB0 . Analog output SM 332, isolated, 4 AO, U/I; diagnostics; resolution 11/12 bits, 20-pole, removing and inserting possible with active backplane bus

6AG1332-5HD01-7AB0

SIPLUS S7-300 SM332 40POLE -25…+70°C with conformal coating based on 6ES7332-5HF00-0AB0 . ANALOG OUTPUT OPTICALLY ISOLATED, 8 AO, U/I; DIAGNOSTICS; RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS

6AG1332-5HF00-2AB0

SIPLUS S7-300 SM 332 4AO with conformal coating based on 6ES7332-7ND02-0AB0 . Analog output isolated by channel, 4 AI, Resolution 16 bit, 0-10 V, 1-5 V, +/-10 V, +/-20 mA, 0/4-20mA, 20-pole, suitable for isochronous mode operation improved bus cycle times for+ the isochronous mode

6AG1332-7ND02-4AB0

Module AI/AO

SIPLUS S7-300 SM 334 4AI 2AO -25…+70°C with conformal coating based on 6ES7334-0KE00-0ab0 . Analog module isolated, 4 AI/2 AO, 12 bit, 0-10 V for Pt100 (climatic range -120-155°C) and 10 kOhm measuring range, 1x 20-pole

6AG1334-0KE00-7AB0

SIMATIC S7, Digital input SM 326, F-DI 24×24 V DC, Fail-safe digital input for SIMATIC S7 F-systems with diagnostic alarm, up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1x 40-pole

6ES7326-1BK02-0AB0

SIMATIC S7, Digital input SM 326, 8 DI; 24 V DC, NAMUR, fail-safe NAMUR input for SIMATIC S7 F-systems, up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1x 40-pole

6ES7326-1RF01-0AB0

SIMATIC S7, digital output SM 326, F-DO10x 24 V DC/2A PP, fail-safe digital output for SIMATIC S7F systems, with diagnostic alarm, LVV, up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1x 40-pole

6ES7326-2BF10-0AB0

SIMATIC S7, Digital output SM 326, F-DO 8×24 V DC/2A PM fail-safe digital output Switching to P-M potential up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1x 40-pole

6ES7326-2BF41-0AB0

SIMATIC S7, Analog input SM 336, 6 AI; 15 bit; fail-safe analog inputs for SIMATIC Safety, with HART support, up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), 1x 20-pole

6ES7336-4GE00-0AB0

SIMATIC S7, Safety protector between F and standard modules With redundant ET 200M interface modules, use only with partition

6ES7195-7KF00-0XA0

SIPLUS S7-300 SM 326F DI24 40-pole -25…+60°C (70°C with forced convection) with conformal coating based on 6ES7326-1BK02-0AB0 . Digital input F-DI 24×24 V DC Fail-safe digital input for SIMATIC S7 F-systems with diagnostic alarm

6AG1326-1BK02-2AB0

SIPLUS S7-300 SM 326F DI8 NAMUR for medial exposure with conformal coating based on 6ES7326-1RF01-0AB0 . Digital input SM 326, 8 DI; 24 V DC, NAMUR, fail-safe NAMUR input for SIMATIC S7 F-systems, up to Category 4 (EN 954-1)/ SIL3 (IEC 61508)/PLE (ISO 13849), 1x 40-pole

6AG1326-1RF01-4AB0

SIPLUS S7-300 SM 326 10F-DO -25…+60°C (70°C with forced convection) with conformal coating based on 6ES7326-2BF10-0AB0 . Digital output 24 V DC/2A PP, fail-safe digital output for SIMATIC S7F systems, with diagnostic alarm, LVV, 1x 40-pole

6AG1326-2BF10-2AB0

SIPLUS S7-300 SM 326F DO8 -25…+60°C with conformal coating based on 6ES7326-2BF41-0AB0 . Digital output F-DO 8x 24 V DC/2A PM fail-safe digital output Sinking-sourcing up to Category 4 (EN 954-1), SIL 3 (IEC 61508)

6AG1326-2BF41-2AB0

SIPLUS S7-300 SM336 F 6AI 15 bit -25…+60 °C (70 °C with forced convection) With conformal coating Based on 6ES7336-4GE00-0AB0 . Fail-safe analog inputs For SIMATIC Safety, with HART support, up to Category 4 (EN 954-1) /SIL3 (IEC 61508)/ PLE (ISO 13849), 1x 20-pole

6AG1336-4GE00-2AB0

SIMATIC S7-300 safety protector -25…+60°C with conformal coating based on 6ES7195-7KF00-0XA0 . Safety protector between F and standard modules With redundant ET 200M interface modules, use only with partition

6AG1195-7KF00-2XA0

SIMATIC S7, digital input SM 321, isolated, 4 DI; 24 V DC, NAMUR/DIN 19234, for signals from the hazardous area, diagnostics-capable, PTB tested

6ES7321-7RD00-0AB0

SIMATIC S7, digital output SM 322, isolated, 4 DO, 15 V / 20 mA 1 x 20-pole, for signals from the hazardous area, diagnostics-capable, PTB tested

6ES7322-5RD00-0AB0

SIMATIC S7, digital output SM 322, isolated, 4 DO, 24 V DC, 10 mA, 1 x 20-pole, for signals from the hazardous area, diagnostics-capable, PTB tested

6ES7322-5SD00-0AB0

SIMATIC S7, analog input SM 331, isolated, 4 AE; 0/4 to 20 mA, 1 x 20-pole, for signals from the hazardous area, diagnostics-capable, PTB tested

6ES7331-7RD00-0AB0

SIMATIC S7, analog input SM 331, isolated, 8 AI thermocouples/4 AI Pt100, for signals from the hazardous area, diagnostics-capable, PTB tested 1 x 20-pole

6ES7331-7SF00-0AB0

SIMATIC S7, analog output SM 332, isolated, 4 AA; 0/4 to 20 mA, 20-pole, for signals from the hazardous area, diagnostics-capable, PTB tested

6ES7332-5RD00-0AB0

SIPLUS S7-300 SM 321 4DI NAMUR for medial exposure with conformal coating based on 6ES7321-7RD00-0AB0 . Digital input Isolated 4 DI; 24 V DC, NAMUR/DIN 19234, for signals from the hazardous area, diagnostics-capable, PTB tested

6AG1321-7RD00-4AB0

SIPLUS S7-300 SM 331 4AI -25…+60°C -25…+70°C (only 4-wire) with conformal coating based on 6ES7331-7RD00-0AB0

6AG1331-7RD00-2AB0

SIPLUS S7-300 SM 331-20-pole medial exposure with conformal coating based on 6ES7331-7SF00-0AB0 without PTB approval

6AG1331-7SF00-4AB0

SIMATIC S7-300, Connection IM 360 in central rack for connection of max. 3 expansion racks, with C-bus

6ES7360-3AA01-0AA0

SIMATIC S7-300, Connection IM 361 in expansion rack for connection to central rack (IM360), supply voltage 24 V DC, with C-bus

6ES7361-3CA01-0AA0

SIMATIC S7-300, Connection IM 365 for connection of an extension rack without C bus, 2 modules+ connecting cable 1 m

6ES7365-0BA01-0AA0

SIPLUS S7-300 IM 365 -25…+60 °C based on 6ES7365-0BA01-0AA0. Connection IM 365 for connection of an extension rack, without C bus, 2 modules+ connecting cable 1 m

6AG1365-0BA01-2AA0

SIMATIC S7-300, Counter module FM 350-1 for S7-300, Counter functions up to 500 kHz 1 channel for connection of 5 V and 24 V incremental encoders Isochronous mode; Measuring range types incl. configuration package on CD

6ES7350-1AH03-0AE0

SIMATIC S7-300, Counter module FM 350-2, 8 channels, 20 kHz, 24 V encoder for counting, frequency measurement, speed measurement, period duration measurement, dosing incl. configuration package and electronic documentation on CD-ROM

6ES7350-2AH01-0AE0

SIMATIC S7-300, positioning module FM 351 for rapid/slow traverse Drives incl. configuration package on CD

6ES7351-1AH02-0AE0

SIMATIC S7-300, cam controller, FM 352, electronic incl. configuration package on CD

6ES7352-1AH02-0AE0

SIMATIC S7-300, FM352-5 with NPN output, High Speed Boolean Processor, for high-speed linking, 12 DI, 8 DO, 1 encoder interface for RS422 incr./SSI encoder

6ES7352-5AH01-0AE0

SIMATIC S7-300, FM352-5 with PNP output, High Speed Boolean Processor, for high-speed linking, 12 DI, 8 DO, 1 encoder interface for RS422 incr./SSI encoder

6ES7352-5AH11-0AE0

SIMATIC S7-300, Control Unit FM 355 C, 4 channels, continuous, 4 AI+8 DI+4 AO incl. multi-language configuration package, Manual and Getting Started (de, de, fr, en fr, it) on CD-ROM

6ES7355-0VH10-0AE0

SIMATIC S7-300, Control Unit FM 355 S, 4 channels, Step and pulse, 4 AI+8 DI+8 DO incl. multi-language configuration package, Manual and Getting Started (de, de, fr, en fr, it) on CD-ROM

6ES7355-1VH10-0AE0

SIMATIC S7-300, temperature Control Unit FM 355-2 C, 4 channels, continuous, 4 AI+8 DI+4 AO incl. multi-language configuration package, Manual and Getting Started (de, de, fr, en it) on CD-ROM

6ES7355-2CH00-0AE0

SIMATIC S7-300, temperature Control Unit FM 355-2S, 4 channels, Step and pulse, 4 AI+8 DI+8 DO incl. multi-language configuration package, Manual and Getting Started (de, de, fr, en it) on CD-ROM

6ES7355-2SH00-0AE0

SIMATIC S7-300, Signal module for 3 SSI encoders for reading in the position value with 2 FREEZE inputs, 1x 20-pole Supports isochronous mode

6ES7338-4BC01-0AB0

SIMATIC S7-300, Interface module IM174, for connection of analog drives and stepper drives on isochronous PROFIBUS to Motion Control systems 4 channels (4 encoder inputs, 4 AO), configurable with STEP 7 V5.4 SP4

6ES7174-0AA10-0AA0

SIWAREX U WEIGHING ELECTRONICS (SINGLE CHANNEL VERSION) * FOR CONNNECTING ONE SCALE * FOR SIMATIC S7-300 AND ET200M * RS232 INTERFACE FOR CONNECT. OF A PC * TTY INTERFACE FOR REMOTE DISPLAY CONNECTION WITH BUS CONNECTOR

7MH4950-1AA01

SIWAREX U WEIGHING ELECTRONICS (TWO-CHANNEL VERSION) * FOR CONNNECTING TWO SCALES * FOR SIMATIC S7-300 AND ET200M * RS232 INTERFACE FOR CONNECT. OF A PC * TTY INTERFACE FOR REMOTE DISPLAY CONNECTION WITH BUS CONNECTOR

7MH4950-2AA01

SIWAREX FTA WEIGHING ELECTRONIC WITH VERIFICATION CAPABILITY.FOR AUTOMATIC AND NON AUTOMATIC . WEIGHING APPLICATIONS. USABLE FOR S7-300 AND ET200M. EC-CERTIFICATE OF CONFORMITY 3 X 6000D. . APPLICATIONS: . RAPID DOSING, FILLING/BAGGING AND LOADING. ATTENTION: FOR LEGAL FOR TRADE APPLICATIONS PLEASE FOLLOW THE LOCAL LAWS APPLYING IN THE COUNTRY OF LEGAL VERIFICATION ! – APPROPRIATE MMC-CARD: ONLY FOR LEGAL-FOR-TRADE APPLICATIONS R76, R51 AND R107: 7MH4900-2AY20

7MH4900-2AA01

SIWAREX Micro Memory Card for SIWAREX FTA,3,3 V NFLASH;32 MB only for legal-for-trade applications R76,R51 and R107

7MH4900-2AY21

SIWAREX FTC WEIGHING ELECTRONIC FOR FORCE MEASUREMENT, BELT SCALE, LOSS-IN-WEIGHT SCALE AND FLOW RATE METER. WITHOUT VERIFICATION CAPABILITY USABLE FOR S7-300 AND ET200M

7MH4900-3AA01

SIMATIC S7-300, Front connector for signal modules with screw contacts, 20-pole

6ES7392-1AJ00-0AA0

SIMATIC S7-300, Front connector with screw contacts, 40-pole

6ES7392-1AM00-0AA0

SIMATIC S7-300, Front connector for signal modules with spring-loaded contacts, 20-pole

6ES7392-1BJ00-0AA0

SIMATIC S7-300, Front connector for signal modules with spring-loaded contacts, 40-pole

6ES7392-1BM01-0AA0

SIFLOW FC070 24V STANDARD SIMATIC S7-300 FUNCTION MODULE 40MM ENCLOSURE IP20 24V DC MODBUS FREQ./PULSE OUTPUT

7ME4120-2DH20-0EA0

SIFLOW FC070 24V EX CT VERSION SIMATIC S7-300 FUNCTION MODULE 80MM ENCLOSURE IP20 24V DC MODBUS FREQ./PULSE OUTPUT WITH (EEXia) IIC APPROVAL

7ME4120-2DH21-0EA0

SIPLUS S7-300 FM350-1 -25…+60 °C with conformal coating based on 6ES7350-1AH03-0AE0. Counter module Counter functions up to 500 kHz 1 channel for connection of 5 V and 24 V incremental encoders Isochronous mode; Measuring range types incl. configuration package auf CD-ROM

6AG1350-1AH03-2AE0

SIPLUS S7-300 FM350-2 8 channels for medial exposure with conformal coating based on 6ES7350-2AH01-0AE0 . Counter module FM 350-2, 8 channels, 20 kHz, 24 V encoder for counting, frequency measurement, speed measurement, period duration measurement, dosing incl. configuration package and Electronic documentation on CD-ROM

6AG1350-2AH01-4AE0

SIPLUS SIWAREX U electronic weighing system for medial exposure based on 7MH4950-2AA01

6AG1950-2AA01-4AA0

SIMATIC S7-300, CP 340 Communications processor with RS232C interface (RS-232-C) incl. configuration package on CD

6ES7340-1AH02-0AE0

SIMATIC S7-300, CP 340 Communications processor with 20 mA interface (TTY) incl. configuration package on CD

6ES7340-1BH02-0AE0

SIMATIC S7-300, CP 340 Communications processor with RS 422/485 interface incl. configuration package on CD

6ES7340-1CH02-0AE0

SIMATIC S7-300, CP 341 Communications processor with RS232C interface (RS-232-C) incl. configuration package on CD

6ES7341-1AH02-0AE0

SIMATIC S7-300, CP 341 Communications processor with 20 mA interface (TTY) incl. configuration package on CD

6ES7341-1BH02-0AE0

SIMATIC S7-300, CP 341 Communications processor with RS422/485 interface incl. configuration package on CD

6ES7341-1CH02-0AE0

SIMATIC S7, MODBUS Master V3.1 single license for 1 installation R-SW, SW and DOCU on CD, HW dongle, Class A, 3 languages (de, de, fr, en fr), executable in STEP 7 V4.02 or higher, reference hardware: CP 341 and CP 441-2

6ES7870-1AA01-0YA0

SIMATIC S7, MODBUS Master V3.1 single license for 1 installation R-SW, without SW and without documentation, HW dongle, Class A, 3 languages (de, de, fr, en fr), executable in STEP 7 V4.02 or higher, reference hardware: CP 341 and CP 441-2

6ES7870-1AA01-0YA1

SIMATIC S7, MODBUS Slave V3.1 single license for 1 installation R-SW, SW and DOCU on CD, HW dongle, Class A, 3 languages (de, de, fr, en fr), executable in STEP 7 V4.02 or higher, reference hardware: CP 341 and CP 441-2

6ES7870-1AB01-0YA0

SIMATIC S7, MODBUS Slave V3.1 single license for 1 installation R-SW, without SW and without documentation, HW dongle, Class A, 3 languages (de, de, fr, en fr), executable in STEP 7 V4.02 or higher, reference hardware: CP 341 and CP 441-2

6ES7870-1AB01-0YA1

SIMATIC NET, CP 343-2 Communications processor for Connection of SIMATIC S7-300 and ET 200M to AS-Interface according to AS-Interface Specification V3.0

6GK7343-2AH01-0XA0

SIMATIC NET, CP 343-2P Communications processor for Connection of SIMATIC S7-300 and ET 200M to AS-Interface configurable with STEP 7 according to AS-Interface Specification V3.0

6GK7343-2AH11-0XA0

Communications processor CP 342-5 for connection of SIMATIC S7-300 to PROFIBUS DP, S5-compatible, PG/OP and S7 communication

6GK7342-5DA03-0XE0

Communications processor CP 342-5 FO for connection of SIMATIC S7-300 to PROFIBUS DP, S5-compatible, PG/OP and S7 communication

6GK7342-5DF00-0XE0

Communications processor CP 343-5 for connection of SIMATIC S7-300 to PROFIBUS, FMS, S5-compatible, PG/OP and S7 communication, 12 Mbit/s, Single-width

6GK7343-5FA01-0XE0

Communications processor CP 343-1 Lean for connection of SIMATIC S7-300 to Industrial Ethernet via TCP/IP and UDP, Multicast, SEND/RECEIVE with and without RFC1006, Fetch/ Write, S7 communication (server), PROFINET IO device integrated 2-port switch ERTEC 200, Module replacement without PG, SNMP diagnostics, initialization via LAN, 2x RJ45 connection for LAN with 10/100 Mbit/s

6GK7343-1CX10-0XE0

Communications processor CP 343-1 for connection of SIMATIC S7-300 to Industrial Ethernet via ISO and TCP/IP, PROFINET IO controller or PROFINET IO device, integrated 2-port switch ERTEC 200, S7 communication, fetch/write, send/receive with and without RFC1006, Multicast DHCP, NTC- CPU Sync, diagnostic, initialization via LAN, 2x RJ45 connection for LAN with 10/100 Mbit/s

6GK7343-1EX30-0XE0

Communications processor CP 343-1 Advanced for connection of SIMATIC S7-300 CPU to Industrial Ethernet: PROFINET IO controller a./o. IO device; RT and IRT, MRP, PROFINET CBA; TCP/IP, ISO, UDP, S7 comm., S5-compat. communication (SEND/RECEIVE) with Fetch/Write RFC1006, Multicast Diagnostic extension, SNMP, DHCP, FTP client/server, e-mail, Gigabit-SS1X RJ45 (10/100/1000) PROFINET interface 2x RJ45 (10/100 Mbit); PROFINET CBA; security (firewall/VPN); PROFIenergy

6GK7343-1GX31-0XE0

Compact Switch Module CSM 377 Connection SIMATIC S7-300 and up to 3 further nodes to Industrial Ethernet with 10/100 Mbit/s unmanaged switch, 4 RJ45 ports, External 24 V DC power supply LED diagnostics, S7-300 module, incl. electron. Equipment Manual on CD-ROM

6GK7377-1AA00-0AA0

SINAUT ST7, TIM 3V-IE communication module for SIMATIC S7-300 with an RS232 interface for SINAUT communication via a classic WAN and an RJ45 interface for SINAUT communication via an IP-based network (WAN or LAN)

6NH7800-3BA00

SINAUT ST7, TIM 3V-IE advanced communication module for SIMATIC S7-300 with an RS232 interface for SINAUT communication via a classic WAN and an RJ45 interface for SINAUT communication via an IP-based network (WAN or LAN)

6NH7800-3CA00

SINAUT ST7, TIM 4R-IE communication module for SIMATIC S7-300, S7-400, PC; with two RS232/RS485 interfaces for SINAUT Communication via standard WAN and two RJ45 interfaces for SINAUT communication via IP-based networks (WAN or LAN)

6NH7800-4BA00

TIM 3V-IE DNP3 communication module for SIMATIC S7-300 with an RS232 interface for DNP3 communication via a classic WAN and an RJ45 interface for DNP3 communication via a IP-based network (WAN or LAN)

6NH7803-3BA00-0AA0

TIM 4R-IE DNP3 communication module for SIMATIC S7-300, S7-400, PC; with two RS232/RS485 Interfaces for DNP3- Communication via standard WAN and two RJ45 interfaces for DNP3 communication via IP-based networks (WAN or LAN)

6NH7803-4BA00-0AA0

MOBY communication module ASM475 for SIMATIC S7 300 and ET200M parameterizable (without front connector)

6GT2002-0GA10

SIPLUS S7-300 CP 340 RS232 -25…+70°C based on 6ES7340-1AH02-0AE0 . Communications processor with RS232C interface (RS-232-C) incl. configuration package auf CD-ROM

6AG1340-1AH02-2AE0

SIPLUS S7-300 CP 340 RS422/485 -25…+60°C conformal coating based on 6ES7340-1CH02-0AE0. Communications processor with RS 422/485 interface incl. configuration package auf CD-ROM

6AG1340-1CH02-2AE0

SIPLUS S7-300, CP 341 -25…+70 °C with conformal coating based on 6ES7341-1AH02-0AE0 . Communications processor with RS232C interface (RS-232-C) incl. configuration package auf CD-ROM

6AG1341-1AH02-7AE0

SIPLUS S7-300 CP 341 RS422/485 -25…+70°C with conformal coating based on 6ES7341-1CH02-0AE0

6AG1341-1CH02-7AE0

SIPLUS NET CP 343-1 Lean -25…+60°C with conformal coating based on 6GK7343-1CX10-0XE0 . Communications processor for connection of SIMATIC S7-300 to Ind. Ethernet via TCP/IP and UDP, MULTICAST, Send/Receive with and without RFC1006, fetch/ write, S7 communication (server) PROFINET IO device integrated 2-port switch ERTEC 200, Size exchange without PG, SNMP diagnostics, Initialization via LAN, 2x RJ45 connection for LAN with 10/100 Mbit/s

6AG1343-1CX10-2XE0

SIPLUS NET CP 343-1 -25…+70 °C with conformal coating based on 6GK7343-1EX30-0XE0 . Communications processor for connection of SIMATIC S7-300 to Industrial Ethernet via ISO and TCP/IP, PROFINET IO controller or PROFINET IO device, Integrated 2-port switch ERTEC 200, S7 communication, fetch/write, Send/Receive with and without RFC1006, MULTICAST DHCP, NTC-CPU Sync, diagnostics, initialization via LAN, 2x RJ45 connection for LAN with 10/100 Mbit/s

6AG1343-1EX30-7XE0

SIPLUS NET CP 343-1 Advanced with conformal coating based on 6GK7343-1GX31-0XE0 . for connection of the SIMATIC S7-300 CPU to Ind. Ethernet; PROFINET IO controller and/or IO Device; RT and RT and IRT IRT, MRP, PROFINET CBA; TCP/IP ISO, UDP, S7 COM, S5-comp. com., (send/receive) with Fetch/Write with and without RFC 1006, MULTICAST Diagnostic extension,SNMP,DHCP, FTP client/server, e-mail, Gigabit-SS1X RJ45 (10/100/1000) PROFINET-SS 2x RJ45(10/100 Mbit) PROFINET CBA; security (firewall/VPN); PROFIenergy

6AG1343-1GX31-4XE0

SIPLUS ST7 TIM 3V-IE -25…+70 °C with conformal coating based on 6NH7800-3BA00 . communication module for SIMATIC S7-300 and C7; with one RS232 interface for SINAUT communication via classic WAN and an RJ45 interface for SINAUT communication via an IP-based network (WAN or LAN)

6AG1800-3BA00-7AA0

SIPLUS ST7 TIM 4R-IE -25…+70 °C with conformal coating based on 6NH7800-4BA00 . communication module for SIMATIC S7-300, S7-400, C7, PC with two RS232/RS485 interfaces for SINAUT Communications via classic WANs and two RJ45 interfaces for SINAUT communication via IP-based networks (WAN or LAN)

6AG1800-4BA00-7AA0

SIPLUS NET TIM 3V-IE DNP3 for medial exposure -25…+70°C based on 6NH7803-3BA00-0AA0 communication module for SIMATIC S7-300 with an RS232 interface

6AG1803-3BA00-7AA0

SIPLUS NET TIM 4R-IE DNP3 -25…+70°C with conformal coating based on 6NH7803-4BA00-0AA0. TIM 4R-IE DNP3 communication module for SIMATIC S7-300, S7-400, PC; with two RS232/RS485 interfaces for DNP3 communication via classic WANs and two RJ45 interfaces for DNP3 communication via IP- based networks (WAN or LAN)

6AG1803-4BA00-7AA0

SIMATIC S7-300, Simulator module SM 374, for simulation of 16 inputs or 16 outputs or 8 inputs and 8 outputs 16 switches, 16 LEDs

6ES7374-2XH01-0AA0

SIMATIC S7-300, dummy module DM 370, Dummy module Use for module replacement

6ES7370-0AA01-0AA0

SIPLUS S7-300 DM370 -40…+70 °C with conformal coating based on 6ES7370-0AA01-0AA0. Dummy module Use for module replacement

6AG1370-0AA01-7AA0